Pacific Strings - Cubase Template (split articulation)

LAYOUT

• Every articulation of every instrument loaded as a separate disabled track.

• All tracks are named as following " [Instrument Name] - [Articulation] "

• Ready to be imported in your own Cubase template in one click.

SMALL CPU & RAM FOOTPRINT

• Every track disabled
• Every track is purged

PRE-DELAY COMPENSATION

• Every track have it's own PDC (Pre-Delay Compensation) according to the values found either on the manual or composer forums.

  

MIDI INIT EVENTS

• A small MIDI Event at the beginning of each track (at bar -4) to set the level of MIDI CCs as following to avoid common issue (no sound etc.) :
  • CC1 (Dynamic) = 60
  • CC11 (Expression) = 60
  • CC7 (Kontakt Volume) = 127
  • CC21 and CC2 (vibrato) = 0
  • CC64 = Sustain Pedal = 0
  • Pitchbend = 0
• A small MIDI Event at the beginning of each track (at bar -3) to set a mic position balance
• To add bars before bar 1 in your template, Go to Project->Project Setup->Increase "Display Bar Offset"

FLEXBILE ROUTING

• All tracks are routed to the master.
• As different composers have different needs, it's up to you to do the routing that most suits your workflow

HOW TO

1. Open your template.
2. Make sure to add bars before bar 1 in your template to make room for the MIDI Init Events. Go to Project->Project Setup->Increase "Display Bar Offset"
3. Go to File->Import->Track Archives then select the xml file and voila.

   

4. Check all the tracks

   

   
   
5. The first time you'll enable one of the tracks, you will be prompted by kontakt to locate the Cinematic Studio Woodwinds library on your hard drive.
6. Make sure to route the imported tracks as you wish.
7. If you cannot see the full name of the tracks, "right click" on any track -> "Track Control Settings" -> Increase the name Width